![]() # > uci: Parse error (EOF with unterminated ') at line 127, byte 2283 iwinfo opkg update Router will download file from server, write it to flash and reboot uci show (to check for errors) uci show firewall The router and keep button pressed for around 6-7 seconds, untilĤ. Connect PC with the LAN port, press the reset button, power up To "tp_recovery.bin" and place it in tftp server directory.ģ. Rename "openwrt-ramips-mt76x8-tplink_tl-wr902ac-v3-squashfs-tftp-recovery.bin" ![]() Configure PC with static IP 192.168.0.66/24 and tftp server.Ģ. ![]() The only way to flash LEDE image in TL-WR902AC v3 is to useġ. * MT7650 ac chip isn't not supported by LEDE/OpenWrt at the moment. TP-Link TL-WR902AC v3 is a pocket-size dual-band (AC750) router etc/init.d/cron enable OpenWrt on TP-Link TL-WR902AC V3 */5 * * * * echo "every 5 minutes" > /tmp/tick.txt Source of this documentation: cron crontab -e THIS DOCUMENTATION WAS COPIED TO HOPEFULLY REVIVE THAT PROJECT AT A LATER POINT OF TIME Compile firmware THIS STEPS WERE NOT TESTED. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |